![]() ![]() ![]() Then add the weight of a shock mount and it’s no joke! Blue Sherpa Softwareīlue Sherpa is free desktop software that lets you update any of their USB mics, control settings such as gain and pickup patterns. Because of that, it won’t work with just any stand. It’s important to realize that the Yeti is a heavy microphone. It allows you to rotate the position of the mic, but since you should really be speaking from only a few inches away, I would skip the stand and get a boom arm or mic stand right away.Ĭheck out the accessories toward the bottom of this review. The stand that comes with the Blue Yeti is nice and solid. Just plug the included cable into a USB port, select it in your audio settings, and start recording.īlue recently came out with software that lets you get updates and adjust settings (see Blue Sherpa below) but it’s optional. You won’t need software or drivers to use the Blue Yeti. It also has a red LED that goes from solid when not muted to flashing when muted so you know which position it’s in at a glance. The mute button is another nice feature not found on many other USB mics. If that happens you can’t fix it with software later. When people start getting loud, it’s nice to be able to quickly turn the gain down so you don’t peak and overload the mic. Most USB microphones don’t include this and require you to adjust gain levels with software, which can difficult to do during a recording. This is controlled by a dial on the back. Gain controls how sensitive the microphone is. This allows you to monitor your recording or streaming without delays.Ī nice touch with the Blue Yeti is that it has a headphone volume knob right on the front. No matter which USB mic you end up getting, make sure it has a headphone jack. Other Features Headphone jack and volume control By default the Nano's gain is set to 30 per cent, which sounds pretty good even though the Yeti sounds a bit overblown if you turn up that gain that high.Stereo mode can be a good choice if you need clear separation of left and right channels – and will also work well for recording instruments, although cardioid is usually a better choice. To be fair, the lack of a gain knob probably won't bother you if you always record in the same environment and don't need to adjust the gain on the fly. ![]() Unfortunately there's no 32-bit Windows version of the Blue Sherpa software, which may catch you out if you record using an old PC. To access the Nano's gain controls you need to install the 'Blue Sherpa' Windows/Mac desktop software, which also lets you control the microphone polar pattern and mute as well as headphone volume. The big difference is that the Nano lacks a physical gain knob, which could frustrate those who like to tweak these settings in search of the best audio quality. On the bottom you'll find a 3.5mm headphone jack, a 3/8-inch tripod thread (with a 5/8-inch adaptor in the box) and microUSB port for connecting the microphone to your desktop or notebook computer. There's a headphone volume dial on the front which doubles as a mic mute button, while there's a polar pattern button on the back. The Nano's basic design is the same as the Yeti but with simplified controls. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |